• 아프가니스탄(USD $)
  • 올란드 제도(EUR €)
  • 알바니아(ALL L)
  • 알제리(DZD د.ج)
  • 아메리칸 사모아(USD $)
  • 안도라(EUR €)
  • 앙골라(USD $)
  • 앵귈라(XCD $)
  • 남극(USD $)
  • 앤티가바부다(XCD $)
  • 아르헨티나(USD $)
  • 아르메니아(AMD Դ)
  • 아루바(AWG ƒ)
  • 어센션 아일랜드(SHP £)
  • 호주(AUD AU$)
  • 오스트리아(EUR €)
  • 아제르바이잔(AZN ман)
  • 바하마(BSD BSD)
  • 바레인(BHD .د.ب)
  • 방글라데시(BDT ৳)
  • 바베이도스(BBD BBD)
  • 벨라루스(USD $)
  • 벨기에(EUR €)
  • 벨리즈(BZD Be)
  • 베냉(XOF Fr)
  • 버뮤다(BMD BD$)
  • 부탄(BTN Nu.)
  • 볼리비아(BOB Bs.)
  • 보스니아 헤르체고비나(BAM КМ)
  • 보츠와나(BWP P)
  • 부베 아일랜드(USD $)
  • 브라질(USD $)
  • 영국령 인도양 영토(USD $)
  • 브루나이(BND B$)
  • 불가리아(EUR €)
  • 부키 나 파소(XOF Fr)
  • 부룬디(BIF ₣)
  • 캄보디아(KHR ៛)
  • 카메룬(XAF ₣)
  • 캐나다(CAD $)
  • 카보베르데(CVE $)
  • 케이맨 제도(KYD $)
  • 중앙 아프리카 공화국(XAF ₣)
  • 차드(XAF ₣)
  • 칠레(USD $)
  • 중국(CNY ¥)
  • 크리스마스 아일랜드(AUD AU$)
  • 코코스(킬링) 제도(AUD AU$)
  • 콜롬비아(USD $)
  • 코모로(KMF Fr)
  • 콩고 - 브라자빌(XAF ₣)
  • 콩고 - 킨샤사(CDF ₣)
  • 쿡 제도(NZD $)
  • 코스타리카(CRC ₡)
  • 코트디부아르(XOF Fr)
  • 크로아티아(EUR €)
  • 키프로스(EUR €)
  • 체코(CZK Kč)
  • 덴마크(DKK kr)
  • 지부티(DJF ₣)
  • 도미니카(XCD $)
  • 도미니카 공화국(DOP $)
  • 에콰도르(USD $)
  • 이집트(EGP E£)
  • 엘살바도르(USD $)
  • 적도 기니(XAF ₣)
  • 에리트레아(ERN Nfk)
  • 에스토니아(EUR €)
  • 에티오피아(ETB Br)
  • 포클랜드 제도(FKP FKP)
  • 페로 제도(DKK kr)
  • 피지(FJD FJ$)
  • 핀란드(EUR €)
  • 프랑스(EUR €)
  • 프랑스령 기아나(EUR €)
  • 프랑스 령 폴리네시아의(XPF ₣)
  • 프랑스 남부 지역(EUR €)
  • 가봉(XOF Fr)
  • 감비아(GMD D)
  • 그루지야(USD $)
  • 독일(EUR €)
  • 가나(GHS ₵)
  • 지브롤터(GBP £)
  • 그리스(EUR €)
  • 그린란드(DKK kr)
  • 그레나다(XCD $)
  • 과들루프(EUR €)
  • 괌(USD $)
  • 과테말라(GTQ Q)
  • 건지(GBP £)
  • 기니(GNF ₣)
  • 기니비사우(XOF Fr)
  • 가이아나(GYD $)
  • 아이티(USD $)
  • 허드 & 맥도날드 제도(AUD AU$)
  • 온두라스(HNL L)
  • 홍콩 특별행정구(HKD HK$)
  • 헝가리(HUF Ft)
  • 아이슬란드(ISK Kr)
  • 인도(INR ₹)
  • 인도네시아(IDR Rp)
  • 이라크(USD $)
  • 아일랜드(EUR €)
  • 맨 섬(GBP £)
  • 이스라엘(ILS ₪)
  • 이탈리아(EUR €)
  • 자메이카(JMD $)
  • 일본(JPY ¥)
  • 저지(GBP £)
  • 요르단(USD $)
  • 카자흐스탄(KZT 〒)
  • 케냐(KES Sh)
  • 키리바시(AUD AU$)
  • 대한민국(KRW ₩)
  • 쿠웨이트(KWD دينار)
  • 키르기스스탄(KGS С̲)
  • 라오스(LAK ₭)
  • 라트비아(EUR €)
  • 레바논(LBP ل.ل)
  • 레소토(USD $)
  • 라이베리아(USD $)
  • 리비아(USD $)
  • 리히텐슈타인(CHF ₣)
  • 리투아니아(EUR €)
  • 룩셈부르크(EUR €)
  • 마카오 특별행정구(MOP P)
  • 마다가스카르(USD $)
  • 말라위(MWK MK)
  • 말레이시아(MYR RM)
  • 몰디브(MVR ރ.)
  • 말리(XOF Fr)
  • 몰타(EUR €)
  • 마셜 제도(USD $)
  • 마르티니크(EUR €)
  • 모리타니(USD $)
  • 모리셔스(MUR ₨)
  • 마요트(EUR €)
  • 멕시코(USD $)
  • 미크로네시아(USD $)
  • 몰도바(MDL L)
  • 모나코(EUR €)
  • 몽골리아(MNT ₮)
  • 몬테네그로(EUR €)
  • 몬세라트(XCD $)
  • 모로코(MAD د.م.)
  • 모잠비크(USD $)
  • 미얀마(버마)(MMK K)
  • 나미비아(USD $)
  • 나우루(AUD AU$)
  • 네팔(NPR ₨)
  • 네덜란드(EUR €)
  • 네덜란드 령 앤 틸리 스(USD $)
  • 뉴 칼레도니아(XPF ₣)
  • 뉴질랜드(NZD $)
  • 니카라과(NIO C$)
  • 니제르(XOF Fr)
  • 나이지리아(NGN ₦)
  • 니우에(NZD $)
  • 노퍽 섬(AUD AU$)
  • 북마케도니아(MKD ден)
  • 북마리아나 제도(USD $)
  • 노르웨이(USD $)
  • 오만(OMR ر.ع.)
  • 파키스탄(PKR ₨)
  • 팔라우(USD $)
  • 팔레스타인 영토(ILS ₪)
  • 파나마(USD $)
  • 파푸아 뉴기니(PGK K)
  • 파라과이(PYG ₲)
  • 페루(PEN S/)
  • 필리핀 제도(PHP ₱)
  • 핏케언 제도(NZD $)
  • 폴란드(PLN zł)
  • 포르투갈(EUR €)
  • 푸에르토 리코(USD $)
  • 카타르(QAR ر.ق)
  • 재결합(EUR €)
  • 루마니아(RON L)
  • 러시아(RUB р.)
  • 르완다(RWF ₣)
  • 사모아(WST T)
  • 산 마리노(EUR €)
  • 상투메프린시페(USD $)
  • 사우디 아라비아(SAR ر.س)
  • 세네갈(XOF Fr)
  • 세르비아(RSD din)
  • 세이셸(USD $)
  • 시에라리온(SLL Le)
  • 싱가포르(SGD S$)
  • 슬로바키아(EUR €)
  • 슬로베니아(EUR €)
  • 솔로몬 제도(SBD Si$)
  • 소말리아(SOS Sh)
  • 남아프리카(USD $)
  • 사우스 조지아 및 사우스 샌드위치 제도(GBP £)
  • 스페인(EUR €)
  • 스리랑카(LKR Rs)
  • 세인트 마틴(EUR €)
  • 세인트 헬레나(SHP £)
  • 세인트키츠네비스(XCD $)
  • 세인트루시아(XCD $)
  • 생 피에르 & 미클롱(EUR €)
  • 세인트빈센트 그레나딘(XCD $)
  • 수단(SDG ج.س.)
  • 수리남(USD $)
  • 스발바르 & 얀 마옌(USD $)
  • 에스와티니(USD $)
  • 스웨덴(SEK kr)
  • 스위스(CHF ₣)
  • 대만(TWD NT$)
  • 타지키스탄(TJS ЅМ)
  • 탄자니아(TZS Sh)
  • 태국(THB ฿)
  • 동티모르(USD $)
  • 토고(XOF Fr)
  • 토켈라우(NZD $)
  • 통가(TOP T$)
  • 트리니다드토바고(TTD TTD)
  • 트리스탄 다 쿠냐(GBP £)
  • 튀니지(USD $)
  • 칠면조(USD $)
  • 투르크메니스탄(TMT m)
  • 터크스케이커스 제도(USD $)
  • 투발루(AUD AU$)
  • 우간다(UGX Sh)
  • 우크라이나(UAH ₴)
  • 아랍 에미리트(AED د.إ)
  • 영국(GBP £)
  • 미국(USD $)
  • 미국 외딴 섬(USD $)
  • 우루과이(UYU $)
  • 우즈베키스탄(UZS лв)
  • 바누아투(VUV Vt)
  • 바티칸 시국(EUR €)
  • 베네수엘라(USD $)
  • 베트남(VND ₫)
  • 버진 아일랜드(USD $)
  • 영국령 버진 아일랜드(USD $)
  • 월리스 & 푸투나(XPF ₣)
  • 서부 사하라(MAD د.م.)
  • 예멘(YER ﷼)
  • 잠비아(USD $)
  • 짐바브웨(USD $)
/ /

Custom Optical Filters: A Buyer's Guide for OEM and Integrators

Oct 29,2026 | JINGYU OPTOELEC

Optical filters are specified, not shopped. Unlike a gobo, nobody buys a dichroic filter because the listing looked nice — they buy it against a coating curve, a substrate, and a tolerance. Which means the supplier conversation is won or lost on how precisely you can describe the requirement, and how fast the supplier can come back with a real answer.

This guide covers what to specify, what drives cost, and the four numbers to send in your first email.

The five filter families, and what each is for

Type

Function

Typical application

Bandpass / dichroic

Passes a wavelength band, reflects the rest

Color separation, sensors, lighting

Longpass / shortpass

Passes above or below a cut-on wavelength

Laser separation, edge filters

AR coating (anti-reflective)

Reduces surface reflection

Lenses, windows, display covers

IR / UV cut

Blocks infrared or ultraviolet

Imaging, beauty devices, thermal protection

Reflective mirror / beam combiner

Redirects or combines beams

Laser optics, projection systems

Each family has its own tolerance language. A "good" spec for an AR window is meaningless for a bandpass filter.

What to specify (the four numbers)

Suppliers can quote a price from almost nothing, but they cannot quote an accurate one. Send these four and the reply becomes a real specification instead of a question:

1. Substrate and thickness. BK7, B270, fused silica, sapphire, or soda-lime. Fused silica and sapphire survive high power and harsh environments; BK7 is the economical default. Thickness is not cosmetic — it shifts the optical path and affects wavefront error.

2. Dimensions and tolerance. Diameter or rectangular size, plus tolerance (±0.1 mm is common). Square-cut windows with tight corner tolerances cost more than round.

3. Optical specification. For a bandpass: center wavelength, bandwidth (FWHM), and blocking range. For AR: the wavelength range and target reflectance per surface. For a mirror: reflectivity at the design angle, and the angle range.

4. Quantity and surface quality. Scratch-dig (e.g. 60-40 or 40-20) and quantity. Surface quality and quantity move price more than any other pair of parameters.

A first email containing these four gets a technical reply. An email saying "we need an optical filter, please quote" gets a request for the same four — and a week lost.

What drives the price

Coating complexity. A single-layer AR is inexpensive. A 40-layer dichroic stack is not. Every additional layer is deposition time and yield risk.

Tolerance. Tightening wavelength tolerance from ±10 nm to ±2 nm typically costs 30–100% more, because yield drops.

Substrate. Sapphire and fused silica cost multiples of soda-lime, and large-format fused silica is often on lead time.

Size. Cost scales faster than area. A 100 mm window is not 4× a 50 mm window — handling and coating uniformity push it higher.

MOQ. Small runs carry setup cost per batch. This is where a factory-direct supplier differs most from a catalog distributor: MOQ is negotiable, and small prototyping runs are possible.

Prototype first, then scale

The failure mode in custom optics is ordering production quantity against an unverified design. Recommended sequence:

  1. Specification review — send the four numbers, get feasibility and a coating curve
  1. Prototype run — 5–20 pieces, measure, iterate
  1. Production — quantity pricing after the design is proven

Skipping step 2 is how projects end up with 5,000 parts that miss the spec by one parameter.

Quality documentation to ask for

  • Coating curve / transmission data for the delivered batch, not a generic datasheet
  • Inspection report — dimensions, scratch-dig, coating adhesion
  • Environmental test results if the part goes outdoors or into a medical device
  • RoHS / REACH declarations for consumer products

If a supplier cannot provide batch-level data, they are trading, not manufacturing.

Two adjacent categories worth knowing

Beauty device filters follow the same rules but with a consumer-safety overlay: IR/UV cut specifications matter for skin-contact devices, and documentation requirements are stricter.

Laser protective lenses are a safety component, not a convenience one. Specify the wavelength, the optical density required, and the power level — and never substitute a general-purpose filter for a rated protective window.

Frequently asked questions

What is the minimum order for custom filters? Prototype runs from small quantities are usually possible with a factory-direct supplier. Production pricing typically starts to improve meaningfully above a few hundred pieces.

Can you match an existing filter's performance? Yes, if you can supply the transmission curve or the original part's specification. Send a sample if documentation is unavailable.

How long does a custom coating run take? Prototypes in 1–2 weeks; production typically 3–5 weeks depending on coating complexity and substrate availability.

Do you provide coating curves with the shipment? Yes, batch-level transmission data on request.


Have a specification to quote?

Send substrate, dimensions, optical spec, and quantity — we will return feasibility, a coating curve, and prototype pricing. sales@gobofactory.com / WhatsApp +86 13456752363.

논평

성명
이메일
논평