• 아프가니스탄(USD $)
  • 올란드 제도(EUR €)
  • 알바니아(ALL L)
  • 알제리(DZD د.ج)
  • 아메리칸 사모아(USD $)
  • 안도라(EUR €)
  • 앙골라(USD $)
  • 앵귈라(XCD $)
  • 남극(USD $)
  • 앤티가바부다(XCD $)
  • 아르헨티나(USD $)
  • 아르메니아(AMD Դ)
  • 아루바(AWG ƒ)
  • 어센션 아일랜드(SHP £)
  • 호주(AUD AU$)
  • 오스트리아(EUR €)
  • 아제르바이잔(AZN ман)
  • 바하마(BSD BSD)
  • 바레인(BHD .د.ب)
  • 방글라데시(BDT ৳)
  • 바베이도스(BBD BBD)
  • 벨라루스(USD $)
  • 벨기에(EUR €)
  • 벨리즈(BZD Be)
  • 베냉(XOF Fr)
  • 버뮤다(BMD BD$)
  • 부탄(BTN Nu.)
  • 볼리비아(BOB Bs.)
  • 보스니아 헤르체고비나(BAM КМ)
  • 보츠와나(BWP P)
  • 부베 아일랜드(USD $)
  • 브라질(USD $)
  • 영국령 인도양 영토(USD $)
  • 브루나이(BND B$)
  • 불가리아(EUR €)
  • 부키 나 파소(XOF Fr)
  • 부룬디(BIF ₣)
  • 캄보디아(KHR ៛)
  • 카메룬(XAF ₣)
  • 캐나다(CAD $)
  • 카보베르데(CVE $)
  • 케이맨 제도(KYD $)
  • 중앙 아프리카 공화국(XAF ₣)
  • 차드(XAF ₣)
  • 칠레(USD $)
  • 중국(CNY ¥)
  • 크리스마스 아일랜드(AUD AU$)
  • 코코스(킬링) 제도(AUD AU$)
  • 콜롬비아(USD $)
  • 코모로(KMF Fr)
  • 콩고 - 브라자빌(XAF ₣)
  • 콩고 - 킨샤사(CDF ₣)
  • 쿡 제도(NZD $)
  • 코스타리카(CRC ₡)
  • 코트디부아르(XOF Fr)
  • 크로아티아(EUR €)
  • 키프로스(EUR €)
  • 체코(CZK Kč)
  • 덴마크(DKK kr)
  • 지부티(DJF ₣)
  • 도미니카(XCD $)
  • 도미니카 공화국(DOP $)
  • 에콰도르(USD $)
  • 이집트(EGP E£)
  • 엘살바도르(USD $)
  • 적도 기니(XAF ₣)
  • 에리트레아(ERN Nfk)
  • 에스토니아(EUR €)
  • 에티오피아(ETB Br)
  • 포클랜드 제도(FKP FKP)
  • 페로 제도(DKK kr)
  • 피지(FJD FJ$)
  • 핀란드(EUR €)
  • 프랑스(EUR €)
  • 프랑스령 기아나(EUR €)
  • 프랑스 령 폴리네시아의(XPF ₣)
  • 프랑스 남부 지역(EUR €)
  • 가봉(XOF Fr)
  • 감비아(GMD D)
  • 그루지야(USD $)
  • 독일(EUR €)
  • 가나(GHS ₵)
  • 지브롤터(GBP £)
  • 그리스(EUR €)
  • 그린란드(DKK kr)
  • 그레나다(XCD $)
  • 과들루프(EUR €)
  • 괌(USD $)
  • 과테말라(GTQ Q)
  • 건지(GBP £)
  • 기니(GNF ₣)
  • 기니비사우(XOF Fr)
  • 가이아나(GYD $)
  • 아이티(USD $)
  • 허드 & 맥도날드 제도(AUD AU$)
  • 온두라스(HNL L)
  • 홍콩 특별행정구(HKD HK$)
  • 헝가리(HUF Ft)
  • 아이슬란드(ISK Kr)
  • 인도(INR ₹)
  • 인도네시아(IDR Rp)
  • 이라크(USD $)
  • 아일랜드(EUR €)
  • 맨 섬(GBP £)
  • 이스라엘(ILS ₪)
  • 이탈리아(EUR €)
  • 자메이카(JMD $)
  • 일본(JPY ¥)
  • 저지(GBP £)
  • 요르단(USD $)
  • 카자흐스탄(KZT 〒)
  • 케냐(KES Sh)
  • 키리바시(AUD AU$)
  • 대한민국(KRW ₩)
  • 쿠웨이트(KWD دينار)
  • 키르기스스탄(KGS С̲)
  • 라오스(LAK ₭)
  • 라트비아(EUR €)
  • 레바논(LBP ل.ل)
  • 레소토(USD $)
  • 라이베리아(USD $)
  • 리비아(USD $)
  • 리히텐슈타인(CHF ₣)
  • 리투아니아(EUR €)
  • 룩셈부르크(EUR €)
  • 마카오 특별행정구(MOP P)
  • 마다가스카르(USD $)
  • 말라위(MWK MK)
  • 말레이시아(MYR RM)
  • 몰디브(MVR ރ.)
  • 말리(XOF Fr)
  • 몰타(EUR €)
  • 마셜 제도(USD $)
  • 마르티니크(EUR €)
  • 모리타니(USD $)
  • 모리셔스(MUR ₨)
  • 마요트(EUR €)
  • 멕시코(USD $)
  • 미크로네시아(USD $)
  • 몰도바(MDL L)
  • 모나코(EUR €)
  • 몽골리아(MNT ₮)
  • 몬테네그로(EUR €)
  • 몬세라트(XCD $)
  • 모로코(MAD د.م.)
  • 모잠비크(USD $)
  • 미얀마(버마)(MMK K)
  • 나미비아(USD $)
  • 나우루(AUD AU$)
  • 네팔(NPR ₨)
  • 네덜란드(EUR €)
  • 네덜란드 령 앤 틸리 스(USD $)
  • 뉴 칼레도니아(XPF ₣)
  • 뉴질랜드(NZD $)
  • 니카라과(NIO C$)
  • 니제르(XOF Fr)
  • 나이지리아(NGN ₦)
  • 니우에(NZD $)
  • 노퍽 섬(AUD AU$)
  • 북마케도니아(MKD ден)
  • 북마리아나 제도(USD $)
  • 노르웨이(USD $)
  • 오만(OMR ر.ع.)
  • 파키스탄(PKR ₨)
  • 팔라우(USD $)
  • 팔레스타인 영토(ILS ₪)
  • 파나마(USD $)
  • 파푸아 뉴기니(PGK K)
  • 파라과이(PYG ₲)
  • 페루(PEN S/)
  • 필리핀 제도(PHP ₱)
  • 핏케언 제도(NZD $)
  • 폴란드(PLN zł)
  • 포르투갈(EUR €)
  • 푸에르토 리코(USD $)
  • 카타르(QAR ر.ق)
  • 재결합(EUR €)
  • 루마니아(RON L)
  • 러시아(RUB р.)
  • 르완다(RWF ₣)
  • 사모아(WST T)
  • 산 마리노(EUR €)
  • 상투메프린시페(USD $)
  • 사우디 아라비아(SAR ر.س)
  • 세네갈(XOF Fr)
  • 세르비아(RSD din)
  • 세이셸(USD $)
  • 시에라리온(SLL Le)
  • 싱가포르(SGD S$)
  • 슬로바키아(EUR €)
  • 슬로베니아(EUR €)
  • 솔로몬 제도(SBD Si$)
  • 소말리아(SOS Sh)
  • 남아프리카(USD $)
  • 사우스 조지아 및 사우스 샌드위치 제도(GBP £)
  • 스페인(EUR €)
  • 스리랑카(LKR Rs)
  • 세인트 마틴(EUR €)
  • 세인트 헬레나(SHP £)
  • 세인트키츠네비스(XCD $)
  • 세인트루시아(XCD $)
  • 생 피에르 & 미클롱(EUR €)
  • 세인트빈센트 그레나딘(XCD $)
  • 수단(SDG ج.س.)
  • 수리남(USD $)
  • 스발바르 & 얀 마옌(USD $)
  • 에스와티니(USD $)
  • 스웨덴(SEK kr)
  • 스위스(CHF ₣)
  • 대만(TWD NT$)
  • 타지키스탄(TJS ЅМ)
  • 탄자니아(TZS Sh)
  • 태국(THB ฿)
  • 동티모르(USD $)
  • 토고(XOF Fr)
  • 토켈라우(NZD $)
  • 통가(TOP T$)
  • 트리니다드토바고(TTD TTD)
  • 트리스탄 다 쿠냐(GBP £)
  • 튀니지(USD $)
  • 칠면조(USD $)
  • 투르크메니스탄(TMT m)
  • 터크스케이커스 제도(USD $)
  • 투발루(AUD AU$)
  • 우간다(UGX Sh)
  • 우크라이나(UAH ₴)
  • 아랍 에미리트(AED د.إ)
  • 영국(GBP £)
  • 미국(USD $)
  • 미국 외딴 섬(USD $)
  • 우루과이(UYU $)
  • 우즈베키스탄(UZS лв)
  • 바누아투(VUV Vt)
  • 바티칸 시국(EUR €)
  • 베네수엘라(USD $)
  • 베트남(VND ₫)
  • 버진 아일랜드(USD $)
  • 영국령 버진 아일랜드(USD $)
  • 월리스 & 푸투나(XPF ₣)
  • 서부 사하라(MAD د.م.)
  • 예멘(YER ﷼)
  • 잠비아(USD $)
  • 짐바브웨(USD $)
/ /

Gobo Design Files: The Specs That Get Your Logo Approved First Time

Oct 26,2026 | JINGYU OPTOELEC

Most custom gobo orders do not fail at production. They fail at the file. A logo that looks perfect on a screen can be physically impossible to etch — and the round of emails that follows is what turns a 3-day order into a 10-day one.

Here are the specs to design to, and the five file problems that cause most delays.

The short version

Send a vector file (AI, EPS, SVG, or a true vector PDF), with:

  • Minimum line weight: 0.2 mm for glass, 0.5 mm for steel
  • Minimum gap between shapes: 0.3 mm
  • All text converted to outlines
  • Single-color artwork, in solid black on white
  • No gradients, no drop shadows, no transparency

That is the whole brief. Everything below explains why each line matters.

Spec 1: Vector, not raster

A gobo is manufactured by etching or coating — a geometric process. It needs paths, not pixels.

Format

Acceptable?

Notes

AI / EPS / SVG

✅ Best

Native vector, easy to scale

Vector PDF

✅ Good

Confirm it is vector, not a flattened export

PNG (high-res)

⚠️ Traceable

Adds 1–2 days, quality loss on fine detail

JPG

❌ No

Compression artifacts make tracing unreliable

Screenshot from a website

❌ No

Usually under 200px; unusable

How to check if your PDF is really vector: zoom to 800%. If the edges stay razor-sharp, it is vector. If it gets blurry or pixelated, it is a flattened image inside a PDF wrapper — very common, and the reason "I sent a PDF" is the single most frequent disappointment.

Spec 2: Minimum line weight

This is where designs break. A gobo is a physical object: a line finer than the manufacturing limit simply will not exist after etching.

Material

Minimum line

Minimum gap

Glass gobo

0.2 mm

0.3 mm

Stainless steel gobo

0.5 mm

0.6 mm

Full-color glass

0.3 mm

0.4 mm

Why the gap matters as much as the line: two shapes closer than the minimum will merge into one blob. Thin letters like i or l, and the inner counters of e and a, are the usual casualties.

The distance problem compounds this. A 0.2 mm line survives etching, but at 8 meters of throw it will blur out regardless. Rule of thumb: line weight should be about 1/300th of the projection width. For a 2-meter-wide projection, that is ~7 mm on the wall — which means your fine detail needs to be generous in the file.

Spec 3: Text must be outlined

Live text depends on a font installed on the supplier's machine. It will not be. The supplier substitutes something, and your brand typeface becomes Arial.

Fix: select all text → Convert to Outlines / Create Outlines. Then re-save.

Spec 4: Impact of color count on price

Every color is a separate production pass. Design within your budget:

Colors

Typical cost

Feels like

1 color

39–70

Clean, classic, cheapest

2 colors

60–95

Brand-accurate for most logos

3 colors

75–120

Detailed marks

Full color

90–250

Photographic only

Design advice: if your logo has 5 colors, you almost never need 5. Pick the 2 that carry recognition — usually the dominant shape plus one accent. Most brand marks read perfectly in one or two colors when projected.

Spec 5: Size the image area, not the outer disc

A gobo has an outer diameter (fits the projector) and an image diameter (where your design can live) — the image area is typically 60–70% of the outer. Artwork placed outside the image circle is cut off.

Ask your supplier for the image diameter of your specific projector model, and design inside it with a 1 mm bleed margin. Do not assume; projector sizes vary significantly across wattages.

The five file mistakes that cause 80% of delays

  1. Flattened PDF — looks vector, is raster. Check at 800% zoom.
  1. Text not outlined — font substitution changes your logo.
  1. Hairline strokes under 0.2 mm — physically not producible.
  1. Artwork outside the image circle — edges clipped at projection.
  1. Sending a phone photo of a printed logo — the most common, and the most expensive to fix.

None of these are design failures. They are format failures — and all five are avoidable in under ten minutes.

A file checklist to send with the order

Copy this into your email:

  • Vector file attached (AI/EPS/SVG/vector PDF)
  • Text converted to outlines ✅
  • Minimum line weight confirmed ≥ 0.2 mm
  • Projector model: ______
  • Image diameter required: ______ mm
  • Colors: ______ (1/2/3/full)
  • Quantity: ______
  • Deadline: ______

Orders that arrive with this list get quoted and proofed the same day. Orders that arrive without it take days.

Frequently asked questions

Can you clean up my file for me? Yes. Vectorizing and simplifying a raster logo is a standard step. It adds 1–2 days, and we will tell you if the result will lose detail before production.

What if my logo has a gradient? Gradients require full-color glass. If your budget is a single-color gobo, we will convert the gradient to a solid or halftone and show you a proof.

Do I get a proof before production? Always. You approve a digital proof before anything is cut — check line weights and the image circle carefully on that proof, not after delivery.

How do I know my projector's image diameter? Send the model name. We match gobos to specific projector optics, and a gobo cut for a 25W unit will not fit a 300W housing.


Send your file, get a proof in 24 hours

Free design check, no minimum order, glass gobos from $39. Email your vector file to sales@gobofactory.com or WhatsApp +86 13456752363.

논평

성명
이메일
논평