• 아프가니스탄(AFN Af)
  • 올란드 제도(EUR €)
  • 알바니아(ALL L)
  • 알제리(DZD د.ج)
  • 아메리칸 사모아(USD $)
  • 안도라(EUR €)
  • 앙골라(USD $)
  • 앵귈라(XCD $)
  • 남극(USD $)
  • 앤티가바부다(XCD $)
  • 아르헨티나(USD $)
  • 아르메니아(AMD Դ)
  • 아루바(AWG ƒ)
  • 어센션 아일랜드(SHP £)
  • 호주(AUD AU$)
  • 오스트리아(EUR €)
  • 아제르바이잔(AZN ман)
  • 바하마(BSD BSD)
  • 바레인(BHD .د.ب)
  • 방글라데시(BDT ৳)
  • 바베이도스(BBD BBD)
  • 벨라루스(USD $)
  • 벨기에(EUR €)
  • 벨리즈(BZD Be)
  • 베냉(XOF Fr)
  • 버뮤다(BMD BD$)
  • 부탄(BTN Nu.)
  • 볼리비아(BOB Bs.)
  • 보스니아 헤르체고비나(BAM КМ)
  • 보츠와나(BWP P)
  • 부베 아일랜드(USD $)
  • 브라질(USD $)
  • 영국령 인도양 영토(USD $)
  • 브루나이(BND B$)
  • 불가리아(BGN лв)
  • 부키 나 파소(XOF Fr)
  • 부룬디(BIF ₣)
  • 캄보디아(KHR ៛)
  • 카메룬(XAF ₣)
  • 캐나다(CAD $)
  • 카보베르데(CVE $)
  • 케이맨 제도(KYD $)
  • 중앙 아프리카 공화국(XAF ₣)
  • 차드(XAF ₣)
  • 칠레(USD $)
  • 중국(CNY ¥)
  • 크리스마스 아일랜드(AUD AU$)
  • 코코스(킬링) 제도(AUD AU$)
  • 콜롬비아(USD $)
  • 코모로(KMF Fr)
  • 콩고 - 브라자빌(XAF ₣)
  • 콩고 - 킨샤사(CDF ₣)
  • 쿡 제도(NZD $)
  • 코스타리카(CRC ₡)
  • 코트디부아르(XOF Fr)
  • 크로아티아(EUR €)
  • 키프로스(EUR €)
  • 체코(CZK Kč)
  • 덴마크(DKK kr)
  • 지부티(DJF ₣)
  • 도미니카(XCD $)
  • 도미니카 공화국(DOP $)
  • 에콰도르(USD $)
  • 이집트(EGP E£)
  • 엘살바도르(USD $)
  • 적도 기니(XAF ₣)
  • 에리트레아(ERN Nfk)
  • 에스토니아(EUR €)
  • 에티오피아(ETB Br)
  • 포클랜드 제도(FKP FKP)
  • 페로 제도(DKK kr)
  • 피지(FJD FJ$)
  • 핀란드(EUR €)
  • 프랑스(EUR €)
  • 프랑스령 기아나(EUR €)
  • 프랑스 령 폴리네시아의(XPF ₣)
  • 프랑스 남부 지역(EUR €)
  • 가봉(XOF Fr)
  • 감비아(GMD D)
  • 그루지야(USD $)
  • 독일(EUR €)
  • 가나(GHS ₵)
  • 지브롤터(GBP £)
  • 그리스(EUR €)
  • 그린란드(DKK kr)
  • 그레나다(XCD $)
  • 과들루프(EUR €)
  • 괌(USD $)
  • 과테말라(GTQ Q)
  • 건지(GBP £)
  • 기니(GNF ₣)
  • 기니비사우(XOF Fr)
  • 가이아나(GYD $)
  • 아이티(USD $)
  • 허드 & 맥도날드 제도(AUD AU$)
  • 온두라스(HNL L)
  • 홍콩 특별행정구(HKD HK$)
  • 헝가리(HUF Ft)
  • 아이슬란드(ISK Kr)
  • 인도(INR ₹)
  • 인도네시아(IDR Rp)
  • 이라크(USD $)
  • 아일랜드(EUR €)
  • 맨 섬(GBP £)
  • 이스라엘(ILS ₪)
  • 이탈리아(EUR €)
  • 자메이카(JMD $)
  • 일본(JPY ¥)
  • 저지(GBP £)
  • 요르단(USD $)
  • 카자흐스탄(KZT 〒)
  • 케냐(KES Sh)
  • 키리바시(AUD AU$)
  • 대한민국(KRW ₩)
  • 쿠웨이트(KWD دينار)
  • 키르기스스탄(KGS С̲)
  • 라오스(LAK ₭)
  • 라트비아(EUR €)
  • 레바논(LBP ل.ل)
  • 레소토(USD $)
  • 라이베리아(USD $)
  • 리비아(USD $)
  • 리히텐슈타인(CHF ₣)
  • 리투아니아(EUR €)
  • 룩셈부르크(EUR €)
  • 마카오 특별행정구(MOP P)
  • 북 마케도니아(MKD ден)
  • 마다가스카르(USD $)
  • 말라위(MWK MK)
  • 말레이시아(MYR RM)
  • 몰디브(MVR ރ.)
  • 말리(XOF Fr)
  • 몰타(EUR €)
  • 마셜 제도(USD $)
  • 마르티니크(EUR €)
  • 모리타니(USD $)
  • 모리셔스(MUR ₨)
  • 마요트(EUR €)
  • 멕시코(USD $)
  • 미크로네시아(USD $)
  • 몰도바(MDL L)
  • 모나코(EUR €)
  • 몽골리아(MNT ₮)
  • 몬테네그로(EUR €)
  • 몬세라트(XCD $)
  • 모로코(MAD د.م.)
  • 모잠비크(USD $)
  • 미얀마(버마)(MMK K)
  • 나미비아(USD $)
  • 나우루(AUD AU$)
  • 네팔(NPR ₨)
  • 네덜란드(EUR €)
  • 네덜란드 령 앤 틸리 스(USD $)
  • 뉴 칼레도니아(XPF ₣)
  • 뉴질랜드(NZD $)
  • 니카라과(NIO C$)
  • 니제르(XOF Fr)
  • 나이지리아(NGN ₦)
  • 니우에(NZD $)
  • 노퍽 섬(AUD AU$)
  • 북마리아나 제도(USD $)
  • 노르웨이(USD $)
  • 오만(OMR ر.ع.)
  • 파키스탄(PKR ₨)
  • 팔라우(USD $)
  • 팔레스타인 영토(ILS ₪)
  • 파나마(USD $)
  • 파푸아 뉴기니(PGK K)
  • 파라과이(PYG ₲)
  • 페루(PEN S/)
  • 필리핀 제도(PHP ₱)
  • 핏케언 제도(NZD $)
  • 폴란드(PLN zł)
  • 포르투갈(EUR €)
  • 푸에르토 리코(USD $)
  • 카타르(QAR ر.ق)
  • 재결합(EUR €)
  • 루마니아(RON L)
  • 러시아(RUB р.)
  • 르완다(RWF ₣)
  • 사모아(WST T)
  • 산 마리노(EUR €)
  • 상투메프린시페(USD $)
  • 사우디 아라비아(SAR ر.س)
  • 세네갈(XOF Fr)
  • 세르비아(RSD din)
  • 세이셸(USD $)
  • 시에라리온(SLL Le)
  • 싱가포르(SGD S$)
  • 슬로바키아(EUR €)
  • 슬로베니아(EUR €)
  • 솔로몬 제도(SBD Si$)
  • 소말리아(SOS Sh)
  • 남아프리카(USD $)
  • 사우스 조지아 및 사우스 샌드위치 제도(GBP £)
  • 스페인(EUR €)
  • 스리랑카(LKR Rs)
  • 세인트 헬레나(SHP £)
  • 세인트키츠네비스(XCD $)
  • 세인트루시아(XCD $)
  • 세인트 마틴(EUR €)
  • 생 피에르 & 미클롱(EUR €)
  • 세인트빈센트 그레나딘(XCD $)
  • 수단(SDG ج.س.)
  • 수리남(USD $)
  • 스발바르 & 얀 마옌(USD $)
  • 에스와티니(USD $)
  • 스웨덴(SEK kr)
  • 스위스(CHF ₣)
  • 대만(TWD NT$)
  • 타지키스탄(TJS ЅМ)
  • 탄자니아(TZS Sh)
  • 태국(THB ฿)
  • 동티모르(USD $)
  • 토고(XOF Fr)
  • 토켈라우(NZD $)
  • 통가(TOP T$)
  • 트리니다드토바고(TTD TTD)
  • 트리스탄 다 쿠냐(GBP £)
  • 튀니지(USD $)
  • 칠면조(USD $)
  • 투르크메니스탄(TMT m)
  • 터크스케이커스 제도(USD $)
  • 투발루(AUD AU$)
  • 우간다(UGX Sh)
  • 우크라이나(UAH ₴)
  • 아랍 에미리트(AED د.إ)
  • 영국(GBP £)
  • 미국(USD $)
  • 미국 외딴 섬(USD $)
  • 우루과이(UYU $)
  • 우즈베키스탄(UZS лв)
  • 바누아투(VUV Vt)
  • 바티칸 시국(EUR €)
  • 베네수엘라(USD $)
  • 베트남(VND ₫)
  • 버진 아일랜드(USD $)
  • 영국령 버진 아일랜드(USD $)
  • 월리스 & 푸투나(XPF ₣)
  • 서부 사하라(MAD د.م.)
  • 예멘(YER ﷼)
  • 잠비아(USD $)
  • 짐바브웨(USD $)
/ /

How to Clean and Service Your Gobo Projector

Nov 22,2024 | JINGYU OPTOELEC

 
Gobo projectors can last many years if properly cared for and maintained. Anyone with basic mechanical and technical skills can remedy most projector problems through careful cleaning and inspection. To avoid causing damage, however, it’s important to follow the recommended steps for your projector model. (Please note that Gobofactory does not accept responsibility for unit failure or personal injury due to cleaning or repairs attempted incorrectly.)

 

Below we share step-by-step instructions on how to clean gobo projectors, both interior and exterior models. For projectors that are exposed to a high amount of dust and dirt, such as a warehouse or exterior installation, the following steps should be performed every 1-3 months. In a low-dust environment, such as an office or retail space, cleaning is necessary only every 1-2 years.

 

We’ve also shared a gobo projector troubleshooting cheat sheet for common gobo projector problems below the full cleaning instructions.

 

How to Clean the ECO Spot Interior LED10, C-25, C40/40+, C60/60+, B90 and B150 Gobofactory Projectors:

 

  1. Always unplug the ECO Spot Gobo Projector and let it cool down before cleaning or maintenance.
  2. Unscrew 4-8 screws (depending on the model) on the outside perimeter of the backplate with a Phillips screwdriver.
  3. Carefully take out your retaining ring for your gobo followed by your gobo. Clean the gobo with a fine microfiber cloth.
  4. After the backplate is unscrewed, carefully pull the projector straight back out of the aluminum projector housing. It should slide straight out along the side rails.
  5. Clean the projector by blowing out the dust from the fans and heat sink with compressed air. Prevent the fan blades from spinning at high speed when using air, as this may damage the bearings. Gently blow dust from other parts.
  6. Clean inside and outside of the aluminum housing with a damp rag or paper towel and wipe dry.
  7. Visually inspect your projector for any signs of damage. Wire damage is most important to look for, as a bad wire can cause the projector to malfunction.
  8. Now inspect the gobo and clean if necessary. The non-reflective side should only be wiped with a dry and clean microfiber cloth, while the reflective side can be cleaned with glass-safe solvent if needed.
  9. The lens should also be cleaned. To remove the lens, simply loosen the lock ring and turn the lens counterclockwise. Thoroughly clean it with a microfiber cloth, and re-screw the lens into the faceplate. It will need to be re-focused later.
  10. When done, slide the projector back into the projector housing by lining up the two side slots on the front with the two slider rails. Slide straight forward until it’s all the way in place.
  11. Carefully screw in the backplate screws, making sure not to strip them. Once the backplate is tight, the gobo projector is successfully reassembled.
     

    Download a PDF version with visuals for LED10, C-25, C40/40+, and C60/60+ here.

    Download a PDF version with visuals for LEDB90 and B150 here.

    How to Clean Exterior Gobofactory Projector Models:


    1. Always unplug the ECO Spot Gobo Projector and let it cool down before cleaning or maintenance.
    2. Unscrew 4-8 thumb screws on the faceplate. Be careful not to lose your rubber seals and washers.
    3. Carefully take out your retaining clip for your gobo followed by your gobo. Clean the gobo with a fine microfiber cloth.
    4. Clean the front of the projector by blowing out the dust from the gobo holder assembly using compressed air. Then blow out the back of the unit through the fan air slots, removing as much dust from the mesh cage as possible.
    5. Clean the outside of the aluminum housing with a damp rag or paper towel and wipe dry.
    6. Visually inspect your projector for any signs of damage. Wire damage is most important to look for, as a bad wire can cause the projector to malfunction.
    7. Now inspect the gobo and clean if necessary. The non-reflective side should only be wiped with a dry and clean microfiber cloth, while the reflective side can be cleaned with glass-safe solvent if needed.
    8. The lens should also be cleaned. To remove the lens, simply loosen the lock ring and turn the lens counterclockwise. Thoroughly clean it with a microfiber cloth, and re-screw the lens into the faceplate. It will need to be re-focused later.
    9. When done, put the faceplate back on using the rubber seals, washers, and thumb screws.

    Gobo Projector Troubleshooting Cheat Sheet:


    Problem Cause Solution
    Projector gets louder or shuts off mid-use Dust build-up, fan failure Cleaning step #5 (interior); #4 (exterior)
    Specks, smudges, or other blemishes on the projected image Dirty gobo or lens Cleaning steps #8 & #9 (interior); #7 & #8 (exterior)
    After servicing, the projected image is uneven, darker, and hard to focus Misaligned front plate Check if the lens is in line with the gobo, if not, rotate the front plate 180 degrees

    It’s our goal to ensure your projector functions at its best over its entire lifespan, so if you have any questions about cleaning your Gobofactory projector, reach out to customer service at 86 13456752363 for assistance.

논평

성명
이메일
논평