• อัฟกานิสถาน(USD $)
  • หมู่เกาะโอลันด์(EUR €)
  • แอลเบเนีย(ALL L)
  • แอลจีเรีย(DZD د.ج)
  • อเมริกันซามัว(USD $)
  • อันดอร์รา(EUR €)
  • แองโกลา(USD $)
  • แองกวิลลา(XCD $)
  • แอนตาร์กติกา(USD $)
  • แอนติกาและบาร์บูดา(XCD $)
  • อาร์เจนตินา(USD $)
  • อาร์เมเนีย(AMD Դ)
  • อารูบา(AWG ƒ)
  • เกาะสวรรค์(SHP £)
  • ออสเตรเลีย(AUD AU$)
  • ออสเตรีย(EUR €)
  • อาเซอร์ไบจาน(AZN ман)
  • บาฮามาส(BSD BSD)
  • บาห์เรน(BHD .د.ب)
  • บังคลาเทศ(BDT ৳)
  • บาร์เบโดส(BBD BBD)
  • เบลารุส(USD $)
  • เบลเยียม(EUR €)
  • เบลีซ(BZD Be)
  • เบนิน(XOF Fr)
  • เบอร์มิวดา(BMD BD$)
  • ภูฏาน(BTN Nu.)
  • โบลิเวีย(BOB Bs.)
  • บอสเนียและเฮอร์เซโกวีนา(BAM КМ)
  • บอตสวานา(BWP P)
  • เกาะบูเวต(USD $)
  • บราซิล(USD $)
  • บริติชอินเดียนโอเชียนเทร์ริทอรี(USD $)
  • บรูไน(BND B$)
  • บัลแกเรีย(BGN лв)
  • บูร์กินาฟาโซ(XOF Fr)
  • บุรุนดี(BIF ₣)
  • กัมพูชา(KHR ៛)
  • แคเมอรูน(XAF ₣)
  • แคนาดา(CAD $)
  • เคปเวิร์ด(CVE $)
  • หมู่เกาะเคย์แมน(KYD $)
  • สาธารณรัฐแอฟริกากลาง(XAF ₣)
  • ชาด(XAF ₣)
  • ชิลี(USD $)
  • จีน(CNY ¥)
  • เกาะคริสต์มาส(AUD AU$)
  • หมู่เกาะโคโคส (หมู่เกาะคีลิง)(AUD AU$)
  • โคลอมเบีย(USD $)
  • คอโมโรส(KMF Fr)
  • คองโก - บราซซาวิล(XAF ₣)
  • คองโก - กินชาซา(CDF ₣)
  • หมู่เกาะคุก(NZD $)
  • คอสตาริกา(CRC ₡)
  • โกตดิวัวร์(XOF Fr)
  • โครเอเชีย(EUR €)
  • ไซปรัส(EUR €)
  • เช็ก(CZK Kč)
  • เดนมาร์ก(DKK kr)
  • จิบูตี(DJF ₣)
  • โดมินิกา(XCD $)
  • สาธารณรัฐโดมินิกัน(DOP $)
  • เอกวาดอร์(USD $)
  • อียิปต์(EGP E£)
  • เอลซัลวาดอร์(USD $)
  • อิเควทอเรียลกินี(XAF ₣)
  • เอริเทรีย(ERN Nfk)
  • เอสโตเนีย(EUR €)
  • เอธิโอเปีย(ETB Br)
  • หมู่เกาะฟอล์กแลนด์(FKP FKP)
  • หมู่เกาะแฟโร(DKK kr)
  • ฟิจิ(FJD FJ$)
  • ฟินแลนด์(EUR €)
  • ฝรั่งเศส(EUR €)
  • เฟรนช์เกียนา(EUR €)
  • เฟรนช์โปลินีเซีย(XPF ₣)
  • เฟรนช์เซาเทิร์นเทร์ริทอรีส์(EUR €)
  • กาบอง(XOF Fr)
  • แกมเบีย(GMD D)
  • จอร์เจีย(USD $)
  • เยอรมนี(EUR €)
  • กานา(GHS ₵)
  • ยิบรอลตาร์(GBP £)
  • กรีซ(EUR €)
  • กรีนแลนด์(DKK kr)
  • เกรเนดา(XCD $)
  • กวาเดอลูป(EUR €)
  • กวม(USD $)
  • กัวเตมาลา(GTQ Q)
  • เกิร์นซีย์(GBP £)
  • กินี(GNF ₣)
  • กินี-บิสเซา(XOF Fr)
  • กายอานา(GYD $)
  • เฮติ(USD $)
  • เกาะเฮิร์ดและหมู่เกาะแมกดอนัลด์(AUD AU$)
  • ฮอนดูรัส(HNL L)
  • เขตปกครองพิเศษฮ่องกง(HKD HK$)
  • ฮังการี(HUF Ft)
  • ไอซ์แลนด์(ISK Kr)
  • อินเดีย(INR ₹)
  • อินโดนีเซีย(IDR Rp)
  • อิรัก(USD $)
  • ไอร์แลนด์(EUR €)
  • ไอล์ออฟแมน(GBP £)
  • อิสราเอล(ILS ₪)
  • อิตาลี(EUR €)
  • จาไมกา(JMD $)
  • ญี่ปุ่น(JPY ¥)
  • เจอร์ซีย์(GBP £)
  • จอร์แดน(USD $)
  • คาซัคสถาน(KZT 〒)
  • เคนยา(KES Sh)
  • คิริบาส(AUD AU$)
  • เกาหลีใต้(KRW ₩)
  • คูเวต(KWD دينار)
  • คีร์กีซสถาน(KGS С̲)
  • ลาว(LAK ₭)
  • ลัตเวีย(EUR €)
  • เลบานอน(LBP ل.ل)
  • เลโซโท(USD $)
  • ไลบีเรีย(USD $)
  • ลิเบีย(USD $)
  • ลิกเตนสไตน์(CHF ₣)
  • ลิทัวเนีย(EUR €)
  • ลักเซมเบิร์ก(EUR €)
  • เขตปกครองพิเศษมาเก๊า(MOP P)
  • นอร์ทมาซิโดเนีย(MKD ден)
  • มาดากัสการ์(USD $)
  • มาลาวี(MWK MK)
  • มาเลเซีย(MYR RM)
  • มัลดีฟส์(MVR ރ.)
  • มาลี(XOF Fr)
  • มอลตา(EUR €)
  • หมู่เกาะมาร์แชลล์(USD $)
  • มาร์ตินีก(EUR €)
  • มอริเตเนีย(USD $)
  • มอริเชียส(MUR ₨)
  • มายอต(EUR €)
  • เม็กซิโก(USD $)
  • ไมโครนีเซีย(USD $)
  • มอลโดวา(MDL L)
  • โมนาโก(EUR €)
  • มองโกเลีย(MNT ₮)
  • มอนเตเนโกร(EUR €)
  • มอนต์เซอร์รัต(XCD $)
  • โมร็อกโก(MAD د.م.)
  • โมซัมบิก(USD $)
  • เมียนมาร์ (พม่า)(MMK K)
  • นามิเบีย(USD $)
  • นาอูรู(AUD AU$)
  • เนปาล(NPR ₨)
  • เนเธอร์แลนด์(EUR €)
  • เนเธอร์แลนด์แอนทิลลิส(USD $)
  • นิวแคลิโดเนีย(XPF ₣)
  • นิวซีแลนด์(NZD $)
  • นิการากัว(NIO C$)
  • ไนเจอร์(XOF Fr)
  • ไนจีเรีย(NGN ₦)
  • นีอูเอ(NZD $)
  • เกาะนอร์ฟอล์ก(AUD AU$)
  • หมู่เกาะนอร์เทิร์นมาเรียนา(USD $)
  • นอร์เวย์(USD $)
  • โอมาน(OMR ر.ع.)
  • ปากีสถาน(PKR ₨)
  • ปาเลา(USD $)
  • ดินแดนปาเลสไตน์(ILS ₪)
  • ปานามา(USD $)
  • ปาปัวนิวกินี(PGK K)
  • ปารากวัย(PYG ₲)
  • เปรู(PEN S/)
  • ฟิลิปปินส์(PHP ₱)
  • หมู่เกาะพิตแคร์น(NZD $)
  • โปแลนด์(PLN zł)
  • โปรตุเกส(EUR €)
  • เปอร์โตริโก้(USD $)
  • กาตาร์(QAR ر.ق)
  • เรอูเนียง(EUR €)
  • โรมาเนีย(RON L)
  • รัสเซีย(RUB р.)
  • รวันดา(RWF ₣)
  • ซามัว(WST T)
  • ซานมารีโน(EUR €)
  • เซาตูเมและปรินซิปี(USD $)
  • ซาอุดีอาระเบีย(SAR ر.س)
  • เซเนกัล(XOF Fr)
  • เซอร์เบีย(RSD din)
  • เซเชลส์(USD $)
  • เซียร์ราลีโอน(SLL Le)
  • สิงคโปร์(SGD S$)
  • สโลวาเกีย(EUR €)
  • สโลวีเนีย(EUR €)
  • หมู่เกาะโซโลมอน(SBD Si$)
  • โซมาเลีย(SOS Sh)
  • แอฟริกาใต้(USD $)
  • เกาะเซาท์จอร์เจียและหมู่เกาะเซาท์แซนด์วิช(GBP £)
  • สเปน(EUR €)
  • ศรีลังกา(LKR Rs)
  • เซนต์มาร์ติน(EUR €)
  • เซนต์เฮเลนา(SHP £)
  • เซนต์คิตส์และเนวิส(XCD $)
  • เซนต์ลูเซีย(XCD $)
  • แซงปีแยร์และมีเกอลง(EUR €)
  • เซนต์วินเซนต์และเกรนาดีนส์(XCD $)
  • ซูดาน(SDG ج.س.)
  • ซูรินาเม(USD $)
  • สฟาลบาร์และยานไมเอน(USD $)
  • เอสวาตีนี(USD $)
  • สวีเดน(SEK kr)
  • สวิตเซอร์แลนด์(CHF ₣)
  • ไต้หวัน(TWD NT$)
  • ทาจิกิสถาน(TJS ЅМ)
  • แทนซาเนีย(TZS Sh)
  • ประเทศไทย(THB ฿)
  • ติมอร์ตะวันออก(USD $)
  • โตโก(XOF Fr)
  • โตเกเลา(NZD $)
  • ตองกา(TOP T$)
  • ตรินิแดดและโตเบโก(TTD TTD)
  • ทริสตันดาคูเนีย(GBP £)
  • ตูนิเซีย(USD $)
  • ตุรกี(USD $)
  • เติร์กเมนิสถาน(TMT m)
  • หมู่เกาะเติกส์และหมู่เกาะเคคอส(USD $)
  • ตูวาลู(AUD AU$)
  • ยูกันดา(UGX Sh)
  • ยูเครน(UAH ₴)
  • สหรัฐอาหรับเอมิเรตส์(AED د.إ)
  • สหราชอาณาจักร(GBP £)
  • สหรัฐอเมริกา(USD $)
  • หมู่เกาะรอบนอกของสหรัฐอเมริกา(USD $)
  • อุรุกวัย(UYU $)
  • อุซเบกิสถาน(UZS лв)
  • วานูอาตู(VUV Vt)
  • นครรัฐวาติกัน(EUR €)
  • เวเนซุเอลา(USD $)
  • เวียดนาม(VND ₫)
  • หมู่เกาะเวอร์จิน(USD $)
  • หมู่เกาะบริติชเวอร์จิน(USD $)
  • วาลลิสและฟุตูนา(XPF ₣)
  • เวสเทิร์นสะฮารา(MAD د.م.)
  • เยเมน(YER ﷼)
  • แซมเบีย(USD $)
  • ซิมบับเว(USD $)
/ /

How to Clean and Service Your Gobo Projector

Nov 22,2024 | JINGYU OPTOELEC

 
Gobo projectors can last many years if properly cared for and maintained. Anyone with basic mechanical and technical skills can remedy most projector problems through careful cleaning and inspection. To avoid causing damage, however, it’s important to follow the recommended steps for your projector model. (Please note that Gobofactory does not accept responsibility for unit failure or personal injury due to cleaning or repairs attempted incorrectly.)

 

Below we share step-by-step instructions on how to clean gobo projectors, both interior and exterior models. For projectors that are exposed to a high amount of dust and dirt, such as a warehouse or exterior installation, the following steps should be performed every 1-3 months. In a low-dust environment, such as an office or retail space, cleaning is necessary only every 1-2 years.

 

We’ve also shared a gobo projector troubleshooting cheat sheet for common gobo projector problems below the full cleaning instructions.

 

How to Clean the ECO Spot Interior LED10, C-25, C40/40+, C60/60+, B90 and B150 Gobofactory Projectors:

 

  1. Always unplug the ECO Spot Gobo Projector and let it cool down before cleaning or maintenance.
  2. Unscrew 4-8 screws (depending on the model) on the outside perimeter of the backplate with a Phillips screwdriver.
  3. Carefully take out your retaining ring for your gobo followed by your gobo. Clean the gobo with a fine microfiber cloth.
  4. After the backplate is unscrewed, carefully pull the projector straight back out of the aluminum projector housing. It should slide straight out along the side rails.
  5. Clean the projector by blowing out the dust from the fans and heat sink with compressed air. Prevent the fan blades from spinning at high speed when using air, as this may damage the bearings. Gently blow dust from other parts.
  6. Clean inside and outside of the aluminum housing with a damp rag or paper towel and wipe dry.
  7. Visually inspect your projector for any signs of damage. Wire damage is most important to look for, as a bad wire can cause the projector to malfunction.
  8. Now inspect the gobo and clean if necessary. The non-reflective side should only be wiped with a dry and clean microfiber cloth, while the reflective side can be cleaned with glass-safe solvent if needed.
  9. The lens should also be cleaned. To remove the lens, simply loosen the lock ring and turn the lens counterclockwise. Thoroughly clean it with a microfiber cloth, and re-screw the lens into the faceplate. It will need to be re-focused later.
  10. When done, slide the projector back into the projector housing by lining up the two side slots on the front with the two slider rails. Slide straight forward until it’s all the way in place.
  11. Carefully screw in the backplate screws, making sure not to strip them. Once the backplate is tight, the gobo projector is successfully reassembled.
     

    Download a PDF version with visuals for LED10, C-25, C40/40+, and C60/60+ here.

    Download a PDF version with visuals for LEDB90 and B150 here.

    How to Clean Exterior Gobofactory Projector Models:


    1. Always unplug the ECO Spot Gobo Projector and let it cool down before cleaning or maintenance.
    2. Unscrew 4-8 thumb screws on the faceplate. Be careful not to lose your rubber seals and washers.
    3. Carefully take out your retaining clip for your gobo followed by your gobo. Clean the gobo with a fine microfiber cloth.
    4. Clean the front of the projector by blowing out the dust from the gobo holder assembly using compressed air. Then blow out the back of the unit through the fan air slots, removing as much dust from the mesh cage as possible.
    5. Clean the outside of the aluminum housing with a damp rag or paper towel and wipe dry.
    6. Visually inspect your projector for any signs of damage. Wire damage is most important to look for, as a bad wire can cause the projector to malfunction.
    7. Now inspect the gobo and clean if necessary. The non-reflective side should only be wiped with a dry and clean microfiber cloth, while the reflective side can be cleaned with glass-safe solvent if needed.
    8. The lens should also be cleaned. To remove the lens, simply loosen the lock ring and turn the lens counterclockwise. Thoroughly clean it with a microfiber cloth, and re-screw the lens into the faceplate. It will need to be re-focused later.
    9. When done, put the faceplate back on using the rubber seals, washers, and thumb screws.

    Gobo Projector Troubleshooting Cheat Sheet:


    Problem Cause Solution
    Projector gets louder or shuts off mid-use Dust build-up, fan failure Cleaning step #5 (interior); #4 (exterior)
    Specks, smudges, or other blemishes on the projected image Dirty gobo or lens Cleaning steps #8 & #9 (interior); #7 & #8 (exterior)
    After servicing, the projected image is uneven, darker, and hard to focus Misaligned front plate Check if the lens is in line with the gobo, if not, rotate the front plate 180 degrees

    It’s our goal to ensure your projector functions at its best over its entire lifespan, so if you have any questions about cleaning your Gobofactory projector, reach out to customer service at 86 13456752363 for assistance.

ความคิดเห็น

ชื่อ
ไปรษณีย์
ความคิดเห็น