• 也門(YER ﷼)
  • 土耳其(USD $)
  • 土庫曼斯坦(TMT m)
  • 不丹(BTN Nu.)
  • 中非共和國(XAF ₣)
  • 中國(CNY ¥)
  • 丹麥(DKK kr)
  • 厄瓜多爾(USD $)
  • 厄立特里亞(ERN Nfk)
  • 巴巴多斯島(BBD BBD)
  • 巴布亞新幾內亞(PGK K)
  • 巴西(USD $)
  • 巴拉圭(PYG ₲)
  • 巴林(BHD .د.ب)
  • 巴哈馬(BSD BSD)
  • 巴拿馬(USD $)
  • 巴勒斯坦(ILS ₪)
  • 巴基斯坦(PKR ₨)
  • 文萊(BND B$)
  • 日本(JPY ¥)
  • 比利時(EUR €)
  • 毛里求斯(MUR ₨)
  • 毛里塔尼亞(USD $)
  • 牙買加(JMD $)
  • 乍得(XAF ₣)
  • 以色列(ILS ₪)
  • 加拿大(CAD $)
  • 加納(GHS ₵)
  • 加蓬(XOF Fr)
  • 北馬里亞納群島(USD $)
  • 北馬其頓(MKD ден)
  • 卡塔爾(QAR ر.ق)
  • 台灣(TWD NT$)
  • 尼日利亞(NGN ₦)
  • 尼日爾(XOF Fr)
  • 尼加拉瓜(NIO C$)
  • 尼泊爾(NPR ₨)
  • 布韋島(USD $)
  • 布基納法索(XOF Fr)
  • 布隆迪(BIF ₣)
  • 瓜德羅普(EUR €)
  • 瓦利斯和福圖納(XPF ₣)
  • 瓦努阿圖(VUV Vt)
  • 白俄羅斯(USD $)
  • 皮特凱恩(NZD $)
  • 立陶宛(EUR €)
  • 伊拉克(USD $)
  • 冰島(ISK Kr)
  • 列支敦士登(CHF ₣)
  • 匈牙利(HUF Ft)
  • 印度(INR ₹)
  • 印度尼西亞(IDR Rp)
  • 危地馬拉(GTQ Q)
  • 吉布提(DJF ₣)
  • 吉爾吉斯斯坦(KGS С̲)
  • 圭亞那(GYD $)
  • 多米尼加(XCD $)
  • 多米尼加共和國(DOP $)
  • 多哥(XOF Fr)
  • 安圭拉(XCD $)
  • 安哥拉(USD $)
  • 安提瓜島和巴布達(XCD $)
  • 安道爾(EUR €)
  • 托克勞(NZD $)
  • 百慕大(BMD BD$)
  • 老撾(LAK ₭)
  • 西班牙(EUR €)
  • 西撒哈拉(MAD د.م.)
  • 伯利茲(BZD Be)
  • 佛得角(CVE $)
  • 克羅地亞(EUR €)
  • 利比里亞(USD $)
  • 利比亞(USD $)
  • 希臘(EUR €)
  • 沙特阿拉伯(SAR ر.س)
  • 貝寧(XOF Fr)
  • 赤道幾內亞(XAF ₣)
  • 亞美尼亞(AMD Դ)
  • 坦桑尼亞(TZS Sh)
  • 委內瑞拉(USD $)
  • 孟加拉(BDT ৳)
  • 岡比亞(GMD D)
  • 帕勞群島(USD $)
  • 所羅門群島(SBD Si$)
  • 拉脫維亞(EUR €)
  • 東帝汶(USD $)
  • 法國(EUR €)
  • 法羅群島(DKK kr)
  • 法屬圭亞那(EUR €)
  • 法屬波利尼西亞(XPF ₣)
  • 法屬南部領地(EUR €)
  • 波多黎各(USD $)
  • 波斯尼亞和黑塞哥維那(BAM КМ)
  • 波蘭(PLN zł)
  • 直布羅陀(GBP £)
  • 肯尼亞(KES Sh)
  • 芬蘭(EUR €)
  • 阿拉伯聯合酋長國(AED د.إ)
  • 阿根廷(USD $)
  • 阿曼(OMR ر.ع.)
  • 阿富汗(USD $)
  • 阿森松島(SHP £)
  • 阿塞拜疆(AZN ман)
  • 阿爾及利亞(DZD د.ج)
  • 阿爾巴尼亞(ALL L)
  • 阿魯巴(AWG ƒ)
  • 俄羅斯(RUB р.)
  • 保加利亞(EUR €)
  • 南非(USD $)
  • 南喬治亞和南桑威奇群島(GBP £)
  • 南極洲(USD $)
  • 哈薩克斯坦(KZT 〒)
  • 柬埔寨(KHR ៛)
  • 津巴布韋(USD $)
  • 洪都拉斯(HNL L)
  • 玻利維亞(BOB Bs.)
  • 科威特(KWD دينار)
  • 科科斯群島(AUD AU$)
  • 科特迪瓦(XOF Fr)
  • 科摩羅(KMF Fr)
  • 突尼斯(USD $)
  • 約旦(USD $)
  • 美國(USD $)
  • 美屬外島(USD $)
  • 美屬薩摩亞(USD $)
  • 英國(GBP £)
  • 英屬印度洋領地(USD $)
  • 香港特別行政區(HKD HK$)
  • 剛果(XAF ₣)
  • 剛果民主共和國(CDF ₣)
  • 哥倫比亞(USD $)
  • 哥斯達黎加(CRC ₡)
  • 埃及(EGP E£)
  • 埃塞俄比亞(ETB Br)
  • 庫克群島(NZD $)
  • 挪威(USD $)
  • 格林納達(XCD $)
  • 格恩西島(GBP £)
  • 格陵蘭(DKK kr)
  • 泰國(THB ฿)
  • 海地(USD $)
  • 烏干達(UGX Sh)
  • 烏克蘭(UAH ₴)
  • 烏拉圭(UYU $)
  • 烏茲別克斯坦(UZS лв)
  • 特立尼達和多巴哥(TTD TTD)
  • 特克斯和凱科斯群島(USD $)
  • 特里斯坦-達庫尼亞(GBP £)
  • 留尼旺島(EUR €)
  • 秘魯(PEN S/)
  • 納米比亞(USD $)
  • 紐埃(NZD $)
  • 索馬里(SOS Sh)
  • 馬耳他(EUR €)
  • 馬里(XOF Fr)
  • 馬來西亞(MYR RM)
  • 馬拉維(MWK MK)
  • 馬約特島(EUR €)
  • 馬紹爾群島(USD $)
  • 馬提尼克(EUR €)
  • 馬達加斯加(USD $)
  • 馬爾代夫(MVR ރ.)
  • 基里巴斯(AUD AU$)
  • 密克羅尼西亞(USD $)
  • 捷克共和國(CZK Kč)
  • 曼島(GBP £)
  • 梵蒂岡(EUR €)
  • 荷屬安地列斯(USD $)
  • 荷蘭(EUR €)
  • 莫桑比克(USD $)
  • 博茨瓦納(BWP P)
  • 喀麥隆(XAF ₣)
  • 喬治亞(USD $)
  • 幾內亞(GNF ₣)
  • 幾內亞比紹(XOF Fr)
  • 斐濟(FJD FJ$)
  • 斯瓦爾巴和揚馬廷(USD $)
  • 斯里蘭卡(LKR Rs)
  • 斯威士蘭(USD $)
  • 斯洛文尼亞(EUR €)
  • 斯洛伐克(EUR €)
  • 智利(USD $)
  • 湯加(TOP T$)
  • 菲律賓(PHP ₱)
  • 萊索托(USD $)
  • 越南(VND ₫)
  • 開曼群島(KYD $)
  • 黑山(EUR €)
  • 塔吉克斯坦(TJS ЅМ)
  • 塞內加爾(XOF Fr)
  • 塞舌爾(USD $)
  • 塞拉利昂(SLL Le)
  • 塞浦路斯(EUR €)
  • 塞爾維亞(RSD din)
  • 奧地利(EUR €)
  • 奧蘭群島(EUR €)
  • 意大利(EUR €)
  • 愛沙尼亞(EUR €)
  • 愛爾蘭(EUR €)
  • 新加坡(SGD S$)
  • 新西蘭(NZD $)
  • 新喀裡多尼亞(XPF ₣)
  • 瑙魯(AUD AU$)
  • 瑞士(CHF ₣)
  • 瑞典(SEK kr)
  • 聖文森特和格林納丁斯(XCD $)
  • 聖皮埃爾和米克隆群島(EUR €)
  • 聖多美和普林西比(USD $)
  • 聖馬丁(EUR €)
  • 聖馬力諾(EUR €)
  • 聖基茨和尼維斯(XCD $)
  • 聖赫勒拿(SHP £)
  • 聖誕島(AUD AU$)
  • 聖盧西亞(XCD $)
  • 葡萄牙(EUR €)
  • 圖瓦盧(AUD AU$)
  • 福克蘭群島(FKP FKP)
  • 維爾京群島,美屬(USD $)
  • 維爾京群島,英屬(USD $)
  • 蒙古(MNT ₮)
  • 蒙特塞拉特(XCD $)
  • 赫德和麥克唐納群島(AUD AU$)
  • 德國(EUR €)
  • 摩洛哥(MAD د.م.)
  • 摩納哥(EUR €)
  • 摩爾多瓦(MDL L)
  • 緬甸(MMK K)
  • 黎巴嫩(LBP ل.ل)
  • 墨西哥(USD $)
  • 澤西島(GBP £)
  • 澳大利亞(AUD AU$)
  • 澳門特別行政區(MOP P)
  • 盧旺達(RWF ₣)
  • 盧森堡(EUR €)
  • 諾福克(AUD AU$)
  • 韓國(KRW ₩)
  • 薩爾瓦多(USD $)
  • 薩摩亞(WST T)
  • 羅馬尼亞(RON L)
  • 贊比亞(USD $)
  • 關島(USD $)
  • 蘇丹(SDG ج.س.)
  • 蘇里南(USD $)
/ /

Gobo Design Files: The Specs That Get Your Logo Approved First Time

Oct 26,2026 | JINGYU OPTOELEC

Most custom gobo orders do not fail at production. They fail at the file. A logo that looks perfect on a screen can be physically impossible to etch — and the round of emails that follows is what turns a 3-day order into a 10-day one.

Here are the specs to design to, and the five file problems that cause most delays.

The short version

Send a vector file (AI, EPS, SVG, or a true vector PDF), with:

  • Minimum line weight: 0.2 mm for glass, 0.5 mm for steel
  • Minimum gap between shapes: 0.3 mm
  • All text converted to outlines
  • Single-color artwork, in solid black on white
  • No gradients, no drop shadows, no transparency

That is the whole brief. Everything below explains why each line matters.

Spec 1: Vector, not raster

A gobo is manufactured by etching or coating — a geometric process. It needs paths, not pixels.

Format

Acceptable?

Notes

AI / EPS / SVG

✅ Best

Native vector, easy to scale

Vector PDF

✅ Good

Confirm it is vector, not a flattened export

PNG (high-res)

⚠️ Traceable

Adds 1–2 days, quality loss on fine detail

JPG

❌ No

Compression artifacts make tracing unreliable

Screenshot from a website

❌ No

Usually under 200px; unusable

How to check if your PDF is really vector: zoom to 800%. If the edges stay razor-sharp, it is vector. If it gets blurry or pixelated, it is a flattened image inside a PDF wrapper — very common, and the reason "I sent a PDF" is the single most frequent disappointment.

Spec 2: Minimum line weight

This is where designs break. A gobo is a physical object: a line finer than the manufacturing limit simply will not exist after etching.

Material

Minimum line

Minimum gap

Glass gobo

0.2 mm

0.3 mm

Stainless steel gobo

0.5 mm

0.6 mm

Full-color glass

0.3 mm

0.4 mm

Why the gap matters as much as the line: two shapes closer than the minimum will merge into one blob. Thin letters like i or l, and the inner counters of e and a, are the usual casualties.

The distance problem compounds this. A 0.2 mm line survives etching, but at 8 meters of throw it will blur out regardless. Rule of thumb: line weight should be about 1/300th of the projection width. For a 2-meter-wide projection, that is ~7 mm on the wall — which means your fine detail needs to be generous in the file.

Spec 3: Text must be outlined

Live text depends on a font installed on the supplier's machine. It will not be. The supplier substitutes something, and your brand typeface becomes Arial.

Fix: select all text → Convert to Outlines / Create Outlines. Then re-save.

Spec 4: Impact of color count on price

Every color is a separate production pass. Design within your budget:

Colors

Typical cost

Feels like

1 color

39–70

Clean, classic, cheapest

2 colors

60–95

Brand-accurate for most logos

3 colors

75–120

Detailed marks

Full color

90–250

Photographic only

Design advice: if your logo has 5 colors, you almost never need 5. Pick the 2 that carry recognition — usually the dominant shape plus one accent. Most brand marks read perfectly in one or two colors when projected.

Spec 5: Size the image area, not the outer disc

A gobo has an outer diameter (fits the projector) and an image diameter (where your design can live) — the image area is typically 60–70% of the outer. Artwork placed outside the image circle is cut off.

Ask your supplier for the image diameter of your specific projector model, and design inside it with a 1 mm bleed margin. Do not assume; projector sizes vary significantly across wattages.

The five file mistakes that cause 80% of delays

  1. Flattened PDF — looks vector, is raster. Check at 800% zoom.
  1. Text not outlined — font substitution changes your logo.
  1. Hairline strokes under 0.2 mm — physically not producible.
  1. Artwork outside the image circle — edges clipped at projection.
  1. Sending a phone photo of a printed logo — the most common, and the most expensive to fix.

None of these are design failures. They are format failures — and all five are avoidable in under ten minutes.

A file checklist to send with the order

Copy this into your email:

  • Vector file attached (AI/EPS/SVG/vector PDF)
  • Text converted to outlines ✅
  • Minimum line weight confirmed ≥ 0.2 mm
  • Projector model: ______
  • Image diameter required: ______ mm
  • Colors: ______ (1/2/3/full)
  • Quantity: ______
  • Deadline: ______

Orders that arrive with this list get quoted and proofed the same day. Orders that arrive without it take days.

Frequently asked questions

Can you clean up my file for me? Yes. Vectorizing and simplifying a raster logo is a standard step. It adds 1–2 days, and we will tell you if the result will lose detail before production.

What if my logo has a gradient? Gradients require full-color glass. If your budget is a single-color gobo, we will convert the gradient to a solid or halftone and show you a proof.

Do I get a proof before production? Always. You approve a digital proof before anything is cut — check line weights and the image circle carefully on that proof, not after delivery.

How do I know my projector's image diameter? Send the model name. We match gobos to specific projector optics, and a gobo cut for a 25W unit will not fit a 300W housing.


Send your file, get a proof in 24 hours

Free design check, no minimum order, glass gobos from $39. Email your vector file to sales@gobofactory.com or WhatsApp +86 13456752363.

發表評論

姓名
郵件
評論