• 也門(YER ﷼)
  • 土耳其(USD $)
  • 土庫曼斯坦(TMT m)
  • 不丹(BTN Nu.)
  • 中非共和國(XAF ₣)
  • 中國(CNY ¥)
  • 丹麥(DKK kr)
  • 厄瓜多爾(USD $)
  • 厄立特里亞(ERN Nfk)
  • 巴巴多斯島(BBD BBD)
  • 巴布亞新幾內亞(PGK K)
  • 巴西(USD $)
  • 巴拉圭(PYG ₲)
  • 巴林(BHD .د.ب)
  • 巴哈馬(BSD BSD)
  • 巴拿馬(USD $)
  • 巴勒斯坦(ILS ₪)
  • 巴基斯坦(PKR ₨)
  • 文萊(BND B$)
  • 日本(JPY ¥)
  • 比利時(EUR €)
  • 毛里求斯(MUR ₨)
  • 毛里塔尼亞(USD $)
  • 牙買加(JMD $)
  • 乍得(XAF ₣)
  • 以色列(ILS ₪)
  • 加拿大(CAD $)
  • 加納(GHS ₵)
  • 加蓬(XOF Fr)
  • 北馬里亞納群島(USD $)
  • 卡塔爾(QAR ر.ق)
  • 台灣(TWD NT$)
  • 尼日利亞(NGN ₦)
  • 尼日爾(XOF Fr)
  • 尼加拉瓜(NIO C$)
  • 尼泊爾(NPR ₨)
  • 布韋島(USD $)
  • 布基納法索(XOF Fr)
  • 布隆迪(BIF ₣)
  • 瓜德羅普(EUR €)
  • 瓦利斯和福圖納(XPF ₣)
  • 瓦努阿圖(VUV Vt)
  • 白俄羅斯(USD $)
  • 皮特凱恩(NZD $)
  • 立陶宛(EUR €)
  • 伊拉克(USD $)
  • 冰島(ISK Kr)
  • 列支敦士登(CHF ₣)
  • 匈牙利(HUF Ft)
  • 印度(INR ₹)
  • 印度尼西亞(IDR Rp)
  • 危地馬拉(GTQ Q)
  • 吉布提(DJF ₣)
  • 吉爾吉斯斯坦(KGS С̲)
  • 圭亞那(GYD $)
  • 多米尼加(XCD $)
  • 多米尼加共和國(DOP $)
  • 多哥(XOF Fr)
  • 安圭拉(XCD $)
  • 安哥拉(USD $)
  • 安提瓜島和巴布達(XCD $)
  • 安道爾(EUR €)
  • 托克勞(NZD $)
  • 百慕大(BMD BD$)
  • 老撾(LAK ₭)
  • 西班牙(EUR €)
  • 西撒哈拉(MAD د.م.)
  • 佛得角(CVE $)
  • 伯利茲(BZD Be)
  • 克羅地亞(EUR €)
  • 利比里亞(USD $)
  • 利比亞(USD $)
  • 希臘(EUR €)
  • 沙特阿拉伯(SAR ر.س)
  • 貝寧(XOF Fr)
  • 赤道幾內亞(XAF ₣)
  • 亞美尼亞(AMD Դ)
  • 坦桑尼亞(TZS Sh)
  • 委內瑞拉(USD $)
  • 孟加拉(BDT ৳)
  • 岡比亞(GMD D)
  • 帕勞群島(USD $)
  • 所羅門群島(SBD Si$)
  • 拉脫維亞(EUR €)
  • 東帝汶(USD $)
  • 波多黎各(USD $)
  • 波斯尼亞和黑塞哥維那(BAM КМ)
  • 波蘭(PLN zł)
  • 法國(EUR €)
  • 法羅群島(DKK kr)
  • 法屬圭亞那(EUR €)
  • 法屬波利尼西亞(XPF ₣)
  • 法屬南部領地(EUR €)
  • 直布羅陀(GBP £)
  • 肯尼亞(KES Sh)
  • 芬蘭(EUR €)
  • 阿拉伯聯合酋長國(AED د.إ)
  • 阿根廷(USD $)
  • 阿曼(OMR ر.ع.)
  • 阿富汗(AFN Af)
  • 阿森松島(SHP £)
  • 阿塞拜疆(AZN ман)
  • 阿爾及利亞(DZD د.ج)
  • 阿爾巴尼亞(ALL L)
  • 阿魯巴(AWG ƒ)
  • 保加利亞(BGN лв)
  • 俄羅斯(RUB р.)
  • 南非(USD $)
  • 南喬治亞和南桑威奇群島(GBP £)
  • 南極洲(USD $)
  • 哈薩克斯坦(KZT 〒)
  • 柬埔寨(KHR ៛)
  • 洪都拉斯(HNL L)
  • 津巴布韋(USD $)
  • 玻利維亞(BOB Bs.)
  • 科威特(KWD دينار)
  • 科科斯群島(AUD AU$)
  • 科特迪瓦(XOF Fr)
  • 科摩羅(KMF Fr)
  • 突尼斯(USD $)
  • 約旦(USD $)
  • 美國(USD $)
  • 美屬外島(USD $)
  • 美屬薩摩亞(USD $)
  • 英國(GBP £)
  • 英屬印度洋領地(USD $)
  • 香港特別行政區(HKD HK$)
  • 剛果(XAF ₣)
  • 剛果民主共和國(CDF ₣)
  • 哥倫比亞(USD $)
  • 哥斯達黎加(CRC ₡)
  • 埃及(EGP E£)
  • 埃塞俄比亞(ETB Br)
  • 庫克群島(NZD $)
  • 挪威(USD $)
  • 格林納達(XCD $)
  • 格恩西島(GBP £)
  • 格陵蘭(DKK kr)
  • 泰國(THB ฿)
  • 海地(USD $)
  • 烏干達(UGX Sh)
  • 烏克蘭(UAH ₴)
  • 烏拉圭(UYU $)
  • 烏茲別克斯坦(UZS лв)
  • 特立尼達和多巴哥(TTD TTD)
  • 特克斯和凱科斯群島(USD $)
  • 特里斯坦-達庫尼亞(GBP £)
  • 留尼旺島(EUR €)
  • 秘魯(PEN S/)
  • 索馬里(SOS Sh)
  • 紐埃(NZD $)
  • 納米比亞(USD $)
  • 馬耳他(EUR €)
  • 馬里(XOF Fr)
  • 馬來西亞(MYR RM)
  • 馬其頓(MKD ден)
  • 馬拉維(MWK MK)
  • 馬約特島(EUR €)
  • 馬紹爾群島(USD $)
  • 馬提尼克(EUR €)
  • 馬達加斯加(USD $)
  • 馬爾代夫(MVR ރ.)
  • 曼島(GBP £)
  • 基里巴斯(AUD AU$)
  • 密克羅尼西亞(USD $)
  • 捷克共和國(CZK Kč)
  • 梵蒂岡(EUR €)
  • 莫桑比克(USD $)
  • 荷屬安地列斯(USD $)
  • 荷蘭(EUR €)
  • 博茨瓦納(BWP P)
  • 喀麥隆(XAF ₣)
  • 喬治亞(USD $)
  • 幾內亞(GNF ₣)
  • 幾內亞比紹(XOF Fr)
  • 斐濟(FJD FJ$)
  • 斯瓦爾巴和揚馬廷(USD $)
  • 斯里蘭卡(LKR Rs)
  • 斯威士蘭(USD $)
  • 斯洛文尼亞(EUR €)
  • 斯洛伐克(EUR €)
  • 智利(USD $)
  • 湯加(TOP T$)
  • 萊索托(USD $)
  • 菲律賓(PHP ₱)
  • 越南(VND ₫)
  • 開曼群島(KYD $)
  • 黑山(EUR €)
  • 塞內加爾(XOF Fr)
  • 塞舌爾(USD $)
  • 塞拉利昂(SLL Le)
  • 塞浦路斯(EUR €)
  • 塞爾維亞(RSD din)
  • 塔吉克斯坦(TJS ЅМ)
  • 奧地利(EUR €)
  • 奧蘭群島(EUR €)
  • 意大利(EUR €)
  • 愛沙尼亞(EUR €)
  • 愛爾蘭(EUR €)
  • 新加坡(SGD S$)
  • 新西蘭(NZD $)
  • 新喀裡多尼亞(XPF ₣)
  • 瑞士(CHF ₣)
  • 瑞典(SEK kr)
  • 瑙魯(AUD AU$)
  • 聖文森特和格林納丁斯(XCD $)
  • 聖皮埃爾和米克隆群島(EUR €)
  • 聖多美和普林西比(USD $)
  • 聖馬丁(EUR €)
  • 聖馬力諾(EUR €)
  • 聖基茨和尼維斯(XCD $)
  • 聖赫勒拿(SHP £)
  • 聖誕島(AUD AU$)
  • 聖盧西亞(XCD $)
  • 葡萄牙(EUR €)
  • 圖瓦盧(AUD AU$)
  • 福克蘭群島(FKP FKP)
  • 維爾京群島,美屬(USD $)
  • 維爾京群島,英屬(USD $)
  • 蒙古(MNT ₮)
  • 蒙特塞拉特(XCD $)
  • 赫德和麥克唐納群島(AUD AU$)
  • 德國(EUR €)
  • 摩洛哥(MAD د.م.)
  • 摩納哥(EUR €)
  • 摩爾多瓦(MDL L)
  • 緬甸(MMK K)
  • 黎巴嫩(LBP ل.ل)
  • 墨西哥(USD $)
  • 澤西島(GBP £)
  • 澳大利亞(AUD AU$)
  • 澳門特別行政區(MOP P)
  • 盧旺達(RWF ₣)
  • 盧森堡(EUR €)
  • 諾福克(AUD AU$)
  • 韓國(KRW ₩)
  • 薩爾瓦多(USD $)
  • 薩摩亞(WST T)
  • 羅馬尼亞(RON L)
  • 贊比亞(USD $)
  • 關島(USD $)
  • 蘇丹(SDG ج.س.)
  • 蘇里南(USD $)
/ /

How to Clean and Service Your Gobo Projector

Nov 22,2024 | JINGYU OPTOELEC

 
Gobo projectors can last many years if properly cared for and maintained. Anyone with basic mechanical and technical skills can remedy most projector problems through careful cleaning and inspection. To avoid causing damage, however, it’s important to follow the recommended steps for your projector model. (Please note that Gobofactory does not accept responsibility for unit failure or personal injury due to cleaning or repairs attempted incorrectly.)

 

Below we share step-by-step instructions on how to clean gobo projectors, both interior and exterior models. For projectors that are exposed to a high amount of dust and dirt, such as a warehouse or exterior installation, the following steps should be performed every 1-3 months. In a low-dust environment, such as an office or retail space, cleaning is necessary only every 1-2 years.

 

We’ve also shared a gobo projector troubleshooting cheat sheet for common gobo projector problems below the full cleaning instructions.

 

How to Clean the ECO Spot Interior LED10, C-25, C40/40+, C60/60+, B90 and B150 Gobofactory Projectors:

 

  1. Always unplug the ECO Spot Gobo Projector and let it cool down before cleaning or maintenance.
  2. Unscrew 4-8 screws (depending on the model) on the outside perimeter of the backplate with a Phillips screwdriver.
  3. Carefully take out your retaining ring for your gobo followed by your gobo. Clean the gobo with a fine microfiber cloth.
  4. After the backplate is unscrewed, carefully pull the projector straight back out of the aluminum projector housing. It should slide straight out along the side rails.
  5. Clean the projector by blowing out the dust from the fans and heat sink with compressed air. Prevent the fan blades from spinning at high speed when using air, as this may damage the bearings. Gently blow dust from other parts.
  6. Clean inside and outside of the aluminum housing with a damp rag or paper towel and wipe dry.
  7. Visually inspect your projector for any signs of damage. Wire damage is most important to look for, as a bad wire can cause the projector to malfunction.
  8. Now inspect the gobo and clean if necessary. The non-reflective side should only be wiped with a dry and clean microfiber cloth, while the reflective side can be cleaned with glass-safe solvent if needed.
  9. The lens should also be cleaned. To remove the lens, simply loosen the lock ring and turn the lens counterclockwise. Thoroughly clean it with a microfiber cloth, and re-screw the lens into the faceplate. It will need to be re-focused later.
  10. When done, slide the projector back into the projector housing by lining up the two side slots on the front with the two slider rails. Slide straight forward until it’s all the way in place.
  11. Carefully screw in the backplate screws, making sure not to strip them. Once the backplate is tight, the gobo projector is successfully reassembled.
     

    Download a PDF version with visuals for LED10, C-25, C40/40+, and C60/60+ here.

    Download a PDF version with visuals for LEDB90 and B150 here.

    How to Clean Exterior Gobofactory Projector Models:


    1. Always unplug the ECO Spot Gobo Projector and let it cool down before cleaning or maintenance.
    2. Unscrew 4-8 thumb screws on the faceplate. Be careful not to lose your rubber seals and washers.
    3. Carefully take out your retaining clip for your gobo followed by your gobo. Clean the gobo with a fine microfiber cloth.
    4. Clean the front of the projector by blowing out the dust from the gobo holder assembly using compressed air. Then blow out the back of the unit through the fan air slots, removing as much dust from the mesh cage as possible.
    5. Clean the outside of the aluminum housing with a damp rag or paper towel and wipe dry.
    6. Visually inspect your projector for any signs of damage. Wire damage is most important to look for, as a bad wire can cause the projector to malfunction.
    7. Now inspect the gobo and clean if necessary. The non-reflective side should only be wiped with a dry and clean microfiber cloth, while the reflective side can be cleaned with glass-safe solvent if needed.
    8. The lens should also be cleaned. To remove the lens, simply loosen the lock ring and turn the lens counterclockwise. Thoroughly clean it with a microfiber cloth, and re-screw the lens into the faceplate. It will need to be re-focused later.
    9. When done, put the faceplate back on using the rubber seals, washers, and thumb screws.

    Gobo Projector Troubleshooting Cheat Sheet:


    Problem Cause Solution
    Projector gets louder or shuts off mid-use Dust build-up, fan failure Cleaning step #5 (interior); #4 (exterior)
    Specks, smudges, or other blemishes on the projected image Dirty gobo or lens Cleaning steps #8 & #9 (interior); #7 & #8 (exterior)
    After servicing, the projected image is uneven, darker, and hard to focus Misaligned front plate Check if the lens is in line with the gobo, if not, rotate the front plate 180 degrees

    It’s our goal to ensure your projector functions at its best over its entire lifespan, so if you have any questions about cleaning your Gobofactory projector, reach out to customer service at 86 13456752363 for assistance.

發表評論

姓名
郵件
評論