• 也門(YER ﷼)
  • 土耳其(USD $)
  • 土庫曼斯坦(TMT m)
  • 不丹(BTN Nu.)
  • 中非共和國(XAF ₣)
  • 中國(CNY ¥)
  • 丹麥(DKK kr)
  • 厄瓜多爾(USD $)
  • 厄立特里亞(ERN Nfk)
  • 巴巴多斯島(BBD BBD)
  • 巴布亞新幾內亞(PGK K)
  • 巴西(USD $)
  • 巴拉圭(PYG ₲)
  • 巴林(BHD .د.ب)
  • 巴哈馬(BSD BSD)
  • 巴拿馬(USD $)
  • 巴勒斯坦(ILS ₪)
  • 巴基斯坦(PKR ₨)
  • 文萊(BND B$)
  • 日本(JPY ¥)
  • 比利時(EUR €)
  • 毛里求斯(MUR ₨)
  • 毛里塔尼亞(USD $)
  • 牙買加(JMD $)
  • 乍得(XAF ₣)
  • 以色列(ILS ₪)
  • 加拿大(CAD $)
  • 加納(GHS ₵)
  • 加蓬(XOF Fr)
  • 北馬里亞納群島(USD $)
  • 卡塔爾(QAR ر.ق)
  • 台灣(TWD NT$)
  • 尼日利亞(NGN ₦)
  • 尼日爾(XOF Fr)
  • 尼加拉瓜(NIO C$)
  • 尼泊爾(NPR ₨)
  • 布韋島(USD $)
  • 布基納法索(XOF Fr)
  • 布隆迪(BIF ₣)
  • 瓜德羅普(EUR €)
  • 瓦利斯和福圖納(XPF ₣)
  • 瓦努阿圖(VUV Vt)
  • 白俄羅斯(USD $)
  • 皮特凱恩(NZD $)
  • 立陶宛(EUR €)
  • 伊拉克(USD $)
  • 冰島(ISK Kr)
  • 列支敦士登(CHF ₣)
  • 匈牙利(HUF Ft)
  • 印度(INR ₹)
  • 印度尼西亞(IDR Rp)
  • 危地馬拉(GTQ Q)
  • 吉布提(DJF ₣)
  • 吉爾吉斯斯坦(KGS С̲)
  • 圭亞那(GYD $)
  • 多米尼加(XCD $)
  • 多米尼加共和國(DOP $)
  • 多哥(XOF Fr)
  • 安圭拉(XCD $)
  • 安哥拉(USD $)
  • 安提瓜島和巴布達(XCD $)
  • 安道爾(EUR €)
  • 托克勞(NZD $)
  • 百慕大(BMD BD$)
  • 老撾(LAK ₭)
  • 西班牙(EUR €)
  • 西撒哈拉(MAD د.م.)
  • 伯利茲(BZD Be)
  • 佛得角(CVE $)
  • 克羅地亞(EUR €)
  • 利比里亞(USD $)
  • 利比亞(USD $)
  • 希臘(EUR €)
  • 沙特阿拉伯(SAR ر.س)
  • 貝寧(XOF Fr)
  • 赤道幾內亞(XAF ₣)
  • 亞美尼亞(AMD Դ)
  • 坦桑尼亞(TZS Sh)
  • 委內瑞拉(USD $)
  • 孟加拉(BDT ৳)
  • 岡比亞(GMD D)
  • 帕勞群島(USD $)
  • 所羅門群島(SBD Si$)
  • 拉脫維亞(EUR €)
  • 東帝汶(USD $)
  • 法國(EUR €)
  • 法羅群島(DKK kr)
  • 法屬圭亞那(EUR €)
  • 法屬波利尼西亞(XPF ₣)
  • 法屬南部領地(EUR €)
  • 波多黎各(USD $)
  • 波斯尼亞和黑塞哥維那(BAM КМ)
  • 波蘭(PLN zł)
  • 直布羅陀(GBP £)
  • 肯尼亞(KES Sh)
  • 芬蘭(EUR €)
  • 阿拉伯聯合酋長國(AED د.إ)
  • 阿根廷(USD $)
  • 阿曼(OMR ر.ع.)
  • 阿富汗(USD $)
  • 阿森松島(SHP £)
  • 阿塞拜疆(AZN ман)
  • 阿爾及利亞(DZD د.ج)
  • 阿爾巴尼亞(ALL L)
  • 阿魯巴(AWG ƒ)
  • 俄羅斯(RUB р.)
  • 保加利亞(BGN лв)
  • 南非(USD $)
  • 南喬治亞和南桑威奇群島(GBP £)
  • 南極洲(USD $)
  • 哈薩克斯坦(KZT 〒)
  • 柬埔寨(KHR ៛)
  • 津巴布韋(USD $)
  • 洪都拉斯(HNL L)
  • 玻利維亞(BOB Bs.)
  • 科威特(KWD دينار)
  • 科科斯群島(AUD AU$)
  • 科特迪瓦(XOF Fr)
  • 科摩羅(KMF Fr)
  • 突尼斯(USD $)
  • 約旦(USD $)
  • 美國(USD $)
  • 美屬外島(USD $)
  • 美屬薩摩亞(USD $)
  • 英國(GBP £)
  • 英屬印度洋領地(USD $)
  • 香港特別行政區(HKD HK$)
  • 剛果(XAF ₣)
  • 剛果民主共和國(CDF ₣)
  • 哥倫比亞(USD $)
  • 哥斯達黎加(CRC ₡)
  • 埃及(EGP E£)
  • 埃塞俄比亞(ETB Br)
  • 庫克群島(NZD $)
  • 挪威(USD $)
  • 格林納達(XCD $)
  • 格恩西島(GBP £)
  • 格陵蘭(DKK kr)
  • 泰國(THB ฿)
  • 海地(USD $)
  • 烏干達(UGX Sh)
  • 烏克蘭(UAH ₴)
  • 烏拉圭(UYU $)
  • 烏茲別克斯坦(UZS лв)
  • 特立尼達和多巴哥(TTD TTD)
  • 特克斯和凱科斯群島(USD $)
  • 特里斯坦-達庫尼亞(GBP £)
  • 留尼旺島(EUR €)
  • 秘魯(PEN S/)
  • 納米比亞(USD $)
  • 紐埃(NZD $)
  • 索馬里(SOS Sh)
  • 馬耳他(EUR €)
  • 馬里(XOF Fr)
  • 馬來西亞(MYR RM)
  • 馬其頓(MKD ден)
  • 馬拉維(MWK MK)
  • 馬約特島(EUR €)
  • 馬紹爾群島(USD $)
  • 馬提尼克(EUR €)
  • 馬達加斯加(USD $)
  • 馬爾代夫(MVR ރ.)
  • 基里巴斯(AUD AU$)
  • 密克羅尼西亞(USD $)
  • 捷克共和國(CZK Kč)
  • 曼島(GBP £)
  • 梵蒂岡(EUR €)
  • 荷屬安地列斯(USD $)
  • 荷蘭(EUR €)
  • 莫桑比克(USD $)
  • 博茨瓦納(BWP P)
  • 喀麥隆(XAF ₣)
  • 喬治亞(USD $)
  • 幾內亞(GNF ₣)
  • 幾內亞比紹(XOF Fr)
  • 斐濟(FJD FJ$)
  • 斯瓦爾巴和揚馬廷(USD $)
  • 斯里蘭卡(LKR Rs)
  • 斯威士蘭(USD $)
  • 斯洛文尼亞(EUR €)
  • 斯洛伐克(EUR €)
  • 智利(USD $)
  • 湯加(TOP T$)
  • 菲律賓(PHP ₱)
  • 萊索托(USD $)
  • 越南(VND ₫)
  • 開曼群島(KYD $)
  • 黑山(EUR €)
  • 塔吉克斯坦(TJS ЅМ)
  • 塞內加爾(XOF Fr)
  • 塞舌爾(USD $)
  • 塞拉利昂(SLL Le)
  • 塞浦路斯(EUR €)
  • 塞爾維亞(RSD din)
  • 奧地利(EUR €)
  • 奧蘭群島(EUR €)
  • 意大利(EUR €)
  • 愛沙尼亞(EUR €)
  • 愛爾蘭(EUR €)
  • 新加坡(SGD S$)
  • 新西蘭(NZD $)
  • 新喀裡多尼亞(XPF ₣)
  • 瑙魯(AUD AU$)
  • 瑞士(CHF ₣)
  • 瑞典(SEK kr)
  • 聖文森特和格林納丁斯(XCD $)
  • 聖皮埃爾和米克隆群島(EUR €)
  • 聖多美和普林西比(USD $)
  • 聖馬丁(EUR €)
  • 聖馬力諾(EUR €)
  • 聖基茨和尼維斯(XCD $)
  • 聖赫勒拿(SHP £)
  • 聖誕島(AUD AU$)
  • 聖盧西亞(XCD $)
  • 葡萄牙(EUR €)
  • 圖瓦盧(AUD AU$)
  • 福克蘭群島(FKP FKP)
  • 維爾京群島,美屬(USD $)
  • 維爾京群島,英屬(USD $)
  • 蒙古(MNT ₮)
  • 蒙特塞拉特(XCD $)
  • 赫德和麥克唐納群島(AUD AU$)
  • 德國(EUR €)
  • 摩洛哥(MAD د.م.)
  • 摩納哥(EUR €)
  • 摩爾多瓦(MDL L)
  • 緬甸(MMK K)
  • 黎巴嫩(LBP ل.ل)
  • 墨西哥(USD $)
  • 澤西島(GBP £)
  • 澳大利亞(AUD AU$)
  • 澳門特別行政區(MOP P)
  • 盧旺達(RWF ₣)
  • 盧森堡(EUR €)
  • 諾福克(AUD AU$)
  • 韓國(KRW ₩)
  • 薩爾瓦多(USD $)
  • 薩摩亞(WST T)
  • 羅馬尼亞(RON L)
  • 贊比亞(USD $)
  • 關島(USD $)
  • 蘇丹(SDG ج.س.)
  • 蘇里南(USD $)
/ /

Gobos Assembly Guide 2026: Steps, Materials & Safety Tips

Jan 19,2026 | JINGYU OPTOELEC

Assembling gobos correctly is critical to ensuring clear projection, device safety, and long-term durability—especially as 2026 brings more diverse gobo materials and smart lighting integration. This technical guide breaks down standard assembly processes, material-specific precautions, and updated safety norms, based on industry standards and manufacturer guidelines.

Gobo Material Types & Assembly Precautions

Gobos vary in material, which directly impacts assembly methods and handling requirements. Understanding these differences prevents damage to both the slide and the fixture.
 
Stainless Steel Gobos: With a thickness of 0.1mm-0.15mm, they are lightweight and affordable. During assembly, use tweezers to avoid finger prints, as oil residues can affect projection clarity. Avoid bending the thin material—apply even pressure when inserting into the holder.
 
Glass Gobo Slides: Thicker (1mm-1.5mm) and capable of displaying complex patterns, but prone to cracking if mishandled. Never touch the coated surface; hold the edges only. 2026’s premium glass slides feature anti-explosion coatings, but avoid sudden temperature changes during assembly.
 
Copper Gobo Slides: Ranging from 0.1mm-0.3mm, they balance durability and cost. Ensure the slide is aligned with the fixture’s positioning pins—misalignment may cause vibration during operation, blurring projections.

Standard Gobo Assembly Steps (2026 Universal Process)

Follow these steps for most gobo fixtures (compatible with 2026 smart and traditional models). Always refer to the manufacturer’s manual for fixture-specific details.
 
Step 1: Preparation & Power Off: Disconnect the fixture from the power source and allow it to cool for 5-10 minutes (critical for LED fixtures to prevent burns). Gather tools: anti-static tweezers, lens cleaning cloth, and a soft brush.
 
Step 2: Open the Fixture Gobo Holder: Locate the gobo compartment—most 2026 models have a quick-release latch (replacing traditional screws for efficiency). For ceiling-mounted fixtures, use a stable ladder and avoid overreaching.
 
Step 3: Insert the Gobo Slide: Align the gobo’s notches with the holder’s guides. For glass slides, ensure the coated side faces the light source; for metal slides, the patterned side should be outward. Push gently until it clicks into place—do not force insertion.
 
Step 4: Secure & Test: Close the compartment and lock the latch. Reconnect power, turn on the fixture, and adjust the focus to check for clear projection. If patterns are blurred, power off and recheck alignment.

2026 Updated Safety Norms & Common Issues

2026 lighting safety standards (aligned with CE and FDA regulations) emphasize assembly practices to reduce fire and electric shock risks.
 
Safety Must-Dos: Ensure the fixture’s power cord has no cracks or wear before assembly. Outdoor fixtures must have an IP65+ rating—verify the gasket is intact when closing the gobo compartment to prevent moisture intrusion. Keep small parts away from children.
 
Common Assembly Issues & Fixes:
① Projection distortion: Check if the slide is bent (replace metal slides if deformed) or misaligned.
② Glass slide cracking: Avoid over-tightening the holder; 2026 fixtures have adjustable clamps to fit glass slides safely.
③ Flickering projections: Ensure the slide is fully seated—loose slides cause contact instability.
 
Proper gobo assembly maximizes projection quality and extends fixture lifespan. For 2026’s smart gobo fixtures, always power off before assembly to protect internal AI modules. Explore our compatible gobos and tools to simplify your assembly process.

發表評論

姓名
郵件
評論